Difference between revisions of "Publications"
From Yade
Gladky.anton (talk | contribs) |
Gladky.anton (talk | contribs) |
||
Line 47: | Line 47: | ||
# ♠ [[Media:smilauer-the_splendors_and_miseries_of_yade_design-2007.pdf|{{ref|V. Šmilauer|The Splendors and Miseries of Yade design| Discrete Element Group for Hazard Mitigation Annual Report 3, Grenoble University of Joseph Fourier, France|K1--K13|2007}}]] |
# ♠ [[Media:smilauer-the_splendors_and_miseries_of_yade_design-2007.pdf|{{ref|V. Šmilauer|The Splendors and Miseries of Yade design| Discrete Element Group for Hazard Mitigation Annual Report 3, Grenoble University of Joseph Fourier, France|K1--K13|2007}}]] |
||
# ♠ [[Media:ahem_2006_kozicki.pdf|{{ref|J. Kozicki, J. Tejchman|2D Lattice Model for Fracture in Brittle Materials|Archives of Hydro-Engineering and Environmental Mechanics|vol 53, no 2, 71-88|2006}}]] |
# ♠ [[Media:ahem_2006_kozicki.pdf|{{ref|J. Kozicki, J. Tejchman|2D Lattice Model for Fracture in Brittle Materials|Archives of Hydro-Engineering and Environmental Mechanics|vol 53, no 2, 71-88|2006}}]] |
||
− | # [[Media:discrete_lattice_model_DEM_risk_mitigation_kozicki.pdf|{{ref|J. Kozicki|Discrete lattice model used to describe the fracture process of concrete|Discrete Element Group for Risk Mitigation Annual Report 1, Grenoble University of Joseph Fourier, France|95--101|2005}}]] |
+ | # ♠ [[Media:discrete_lattice_model_DEM_risk_mitigation_kozicki.pdf|{{ref|J. Kozicki|Discrete lattice model used to describe the fracture process of concrete|Discrete Element Group for Risk Mitigation Annual Report 1, Grenoble University of Joseph Fourier, France|95--101|2005}}]] |
# {{ref|S. Hentz, F.V. Donzé, L.Daudeville|Discrete elements modeling of a reinforced concrete structure submitted to a rock impact|Italian Geotechnical Journal, XXXIX|n°4, 83-94|2005}} |
# {{ref|S. Hentz, F.V. Donzé, L.Daudeville|Discrete elements modeling of a reinforced concrete structure submitted to a rock impact|Italian Geotechnical Journal, XXXIX|n°4, 83-94|2005}} |
||
# {{ref|F.V. Donzé, P. Bernasconi|Simulation of the Blasting Patterns in Shaft Sinking Using a Discrete Element Method|Electronic Journal of Geotechnical Engineering|vol:9 No B pp.1-44|2004}} |
# {{ref|F.V. Donzé, P. Bernasconi|Simulation of the Blasting Patterns in Shaft Sinking Using a Discrete Element Method|Electronic Journal of Geotechnical Engineering|vol:9 No B pp.1-44|2004}} |
Revision as of 15:17, 4 July 2010
Please convert your articles to BibTeX and add them to http://bazaar.launchpad.net/~yade-dev/yade/trunk/annotate/head:/doc/references.bib. Items that are already there are marked with ♠ at the beginning.
Publications are divided into several categories below, sorted by year.
Publications about YADE
Note: the articles are using different class naming.
- ♠ J. Kozicki, F.V. Donzé „A new open-source software developed for numerical simulations using discrete modeling methods”. Computer Methods in Applied Mechanics and Engineering, Vol:197, pages 4429-4443, 2008 1 DOJ
- ♠ J. Kozicki, F.V. Donzé „YADE-OPEN DEM: an open-source software using a discrete element method to simulate granular material”. Engineering Computations, Vol:26, Issue 7, pages 786-805 2008
If you use the triaxial test and you want to give a reference to a paper describing algorithms for compaction and stress/strain control, (almost) everything was explained in this paper :
- ♠ Chareyre, B., Briancon, L., and Villard, P. „"Theoretical versus experimental modeling of the anchorage capacity of geotextiles in trenches."”. Geosynthetics International, 9(2), 97–123. (2002)
If you use the sphere-padder packing algorithm, please cite these papers:
- ♠ Jerier, J.-F., Richefeu, V., Imbault, D., Donzé, V.F. „"Packing spherical discrete elements for large scale simulations."”. Computer Methods in Applied Mechanics and Engineering, to be published (2010) DOI 10.1016/j.cma.2010.01.016
- ♠ Jerier, J.-F., Imbault, D., Donzé, V.F. and Doremus P. „A geometric algorithm based on tetrahedral meshes to generate a dense polydisperse sphere packing.”. Granular matter, Volume 11 (2009). DOI 10.1007/s10035-008-0116-0
Publications in journals from ISI Master Journal List*
- ?? J-F. Jerier, B. Harthong, V. Richefeu, B. Chareyre, D. Imbault, F.V Donze and P. Doremus „ Modelling of high-density compaction of granular materials by the discrete element method”. International Journal of Solids and Structures, Powder technology (to be published) 2010.
- ♠ B. Harthong, J-F. Jerier, D. Imbault, F.V. Donze and P. Doremus „Modelling of high-density compaction of granular materials by the discrete element method”. International Journal of Solids and Structures, Volume 46, Issue 18-19, Pages 3357-3364 2009. DOI 10.1016/j.ijsolstr.2009.05.008
- ♠ L. Scholtès, B. Chareyre, F. Nicot, F. Darve „Micromechanics of granular materials with capillary effects”. International Journal of Engineering Science, Volume 47, Issue 1, Pages 64-75 2009. DOI 10.1016/j.ijengsci.2008.07.002
- ♠ L. Scholtès, P.-Y. Hicher, F. Nicot, B. Chareyre, F. Darve „On the capillary stress tensor in wet granular materials”. International Journal for Numerical and Analytical Methods in Geomechanics, Volume 33 Issue 10, Pages 1289 - 1313 2009. DOI 10.1002/nag.767
- ♠ L. Sibille, F.-V. Donzé, F. Nicot, B. Chareyre, F. Darve „From bifurcation to failure in a granular material: a DEM analysis”. Acta Geotechnica, Volume 3, Number 1, pp. 15-24 2008. DOI 10.1007/s11440-007-0035-y
- ♠ Feng Chen, Eric. C. Drumm, and Georges Guiochon „Prediction/Verification of Particle Motion in One Dimension with the Discrete-Element Method”. International Journal of Geomechanics, ASCE, Volume 7, Issue 5, pp. 344-352 2007 DOI 10.1061/(ASCE)1532-3641(2007)7:5(344)
- ♠ Nicot, F., L. Sibille, F.V. Donzé, F. Darve „From microscopic to macroscopic second-order work in granular assemblies”. Int. J. Mech. Mater., 39 (7), 664-684 2007 DOI 10.1016/j.mechmat.2006.10.003
- ♠ L. Sibille, F. Nicot, F.V. Donzé, F. Darve „Material instability in granular assemblies from fundamentally different models”. International Journal For Numerical and Analytical Methods in Geomechanics, vol:31, 457-481 2007 DOI 10.1002/nag.591
- ♠ J. Kozicki, J. Tejchman „Effect of aggregate structure on fracture process in concrete using 2D lattice model”. Archives of Mechanics, Vol. 59, No 4–5, pages 365–384 2007 DOI ---
- ♠ Chareyre, B., Villard, P. „ Dynamic Spar Elements and Discrete Element Methods in Two Dimensions for the Modeling of Soil-Inclusion Problems”. J. Engrg. Mech., Volume 131, Issue 7 2005. DOI 10.1061/(ASCE)0733-9399(2005)131:7(689)
- ♠ S. Hentz,F.V. Donzé, L.Daudeville „Discrete element modelling of concrete submitted to dynamic loading at high strain rates”. Computers and Structures, vol: 82 No 29-30 pp.2509-2524 2004 DOI doi:10.1016/j.compstruc.2004.05.016
- ♠ S. Hentz, L. Daudeville, F.V. Donzé „Identification and Validation of a Discrete Element Model for Concrete”. ASCE Journal of Engineering Mechanics, vol:130 No 6 pp.709-719 2004 DOI 10.1061/(ASCE)0733-9399(2004)130:6(709)
- ♠ Villard P., Chareyre B. „ Design methods for geosynthetic anchor trenches on the basis of true scale experiments and discrete element modelling”. Canadian Geotechnical Journal, 41 pp 1193-1205 2004 DOI--
- ♠ F. Camborde, C. Mariotti, F.V. Donzé „Numerical study of rock and Concrete behaviour by discrete element modelling”. Computers and Geotechnics, 27 : 225-247 2000
- ♠ F.V. Donzé, S.A. Magnier, L. Daudeville, C. Mariotti, L. Davenne „Study of the behavior of concrete at high strain rate compressions by a discrete element method”. ASCE J. of Eng. Mech, 125 (10) : 1154-1163 1999 DOI 10.1016/S0266-352X(00)00013-6
- ♠ S.A. Magnier, F.V. Donzé „Numerical simulation of impacts using a discrete element method”. Mech. Cohes.-frict. Mater., 3, 257-276 1998 DOI 10.1002/(SICI)1099-1484(199807)3:3<257::AID-CFM50>3.0.CO;2-Z
- ♠ F.V. Donzé, S.A. Magnier „Formulation of a three-dimensional numerical model of brittle behavior”. Geophys. J. Int., 122, 790-802 1995 DOI--
- ♠ F.V. Donzé, P. Mora, S.A. Magnier „Numerical simulation of faults and shear zones”. Geophys. J. Int., 116, 46-52 1994 DOI 10.1111/j.1365-246X.1994.tb02126.x
- ♠ Chareyre, B., Briancon, L., and Villard, P. „Theoretical versus experimental modeling of the anchorage capacity of geotextiles in trenches.”. Geosynthet. Int., 9(2), 97–123. (2002)
*Institute for Scientific Information Master Journal List is also known under name „Philadelphian List”, see [1]
Publications in peer─reviewed journals
- ♠ V. Šmilauer „The Splendors and Miseries of Yade design”. Discrete Element Group for Hazard Mitigation Annual Report 3, Grenoble University of Joseph Fourier, France, K1--K13 2007
- ♠ J. Kozicki, J. Tejchman „2D Lattice Model for Fracture in Brittle Materials”. Archives of Hydro-Engineering and Environmental Mechanics, vol 53, no 2, 71-88 2006
- ♠ J. Kozicki „Discrete lattice model used to describe the fracture process of concrete”. Discrete Element Group for Risk Mitigation Annual Report 1, Grenoble University of Joseph Fourier, France, 95--101 2005
- S. Hentz, F.V. Donzé, L.Daudeville „Discrete elements modeling of a reinforced concrete structure submitted to a rock impact”. Italian Geotechnical Journal, XXXIX, n°4, 83-94 2005
- F.V. Donzé, P. Bernasconi „Simulation of the Blasting Patterns in Shaft Sinking Using a Discrete Element Method”. Electronic Journal of Geotechnical Engineering, vol:9 No B pp.1-44 2004
PhD theses
- J. Kozicki „Application of Discrete Models to Describe the Fracture Process in Brittle Materials”. Gdansk University of Technology, PhD thesis, 2007
- J. Duriez „Stabilité des massifs rocheux : une approche mécanique”. Institut polytechnique de Grenoble, PhD thesis, 2009
- ♠ Václav Šmilauer „Cohesive Particle Model using the Discrete Element Method on the Yade Platform”. Czech Technical University in Prague & Université Joseph Fourier, Grenoble, PhD thesis , 2010 (thesis summary in a 35-page booklet: ♠ Václav Šmilauer „Doctoral thesis statement”. Czech Technical University in Prague , 2010) (LaTeX sources)
Master theses
Conference materials
- ♠ V. Šmilauer „Yade: past, present, future”. Internal seminary, Laboratoire 3S-R Grenoble 12. 3. 2010
- Chen, F., Drumm, E.C., Guiochon, G. „3D DEM Analysis Of Graded Rock Fill Sinkhole Repair: Particle Size Effects On The Probability Of Stability”. 2009 Transportation Research Board Conference , Washington DC January 2009
- ♠ V. Šmilauer „Commanding c++ with python”. ALERT Doctoral school talk (unpublished), Aussois 2008
- Chen, F., Drumm, E.C., Guiochon, G., and Suzuki, K. „Discrete Element Simulation of 1D Upward Seepage Flow with Particle-Fluid Interaction Using Coupled Open Source Software”. Proceedings of The 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG) Goa, India, 1-6 October 2008
- Dang, H.K. and Mohamed, M.A. „An algorithm to generate a specimen for Discrete Element simulations with a predefined grain size distribution.”. 61th Canadian Geotechnical Conference, Edmonton, Alberta September 2008
- Dang, H.K. and Mohamed, M.A. „3D simulation of the trap door problem using the Discrete Element Method.”. 61th Canadian Geotechnical Conference, Edmonton, Alberta September 2008
- L. Scholtès, B. Chareyre, F. Nicot, F. Darve „Capillary Effects Modelling in Unsaturated Granular Materials”. 8th World Congress on Computational Mechanics - 5th European Congress on Computational Methods in Applied Sciences and Engineering, Venice July 2008
- L. Scholtès, P.-Y. Hicher, F.Nicot, B. Chareyre, F. Darve „On the Capillary Stress Tensor in unsaturated granular materials”. EM08: Inaugural International Conference of the Engineering Mechanics Institute, Minneapolis April 2008
- L. Scholtès, B. Chareyre, F. Nicot, F. Darve „Micromechanical Modelling of Unsaturated Granular Media”. Proceedings ECCOMAS-MHM07, Prague June 2007
- W. Shiu, F.V. Donze, L. Daudeville „Discrete element modelling of missile impacts on a reinforced concrete target”. Int. Conf. on Computational Fracture and Failure of Materials and Structures (CFRAC 2007), Nantes, 11--13 June 2007
- V. Šmilauer „Discrete and hybrid models: Applications to concrete damage”. (unpublished) , June 2007
- J. Kozicki, J. Tejchman „Simulations of fracture processes in concrete using a 3D lattice model”. Int. Conf. on Computational Fracture and Failure of Materials and Structures (CFRAC 2007), Nantes, 11--13 June 2007
- J. Kozicki, J. Tejchman „Effect of aggregate density on fracture process in concrete using 2D discrete lattice model”. Proc. Conf. Computer Methods in Mechanics (CMM 2007), Lodz-Spala 19-22 June 2007
- J. Kozicki, J. Tejchman „Modelling of a direct shear test in granular bodies with a continuum and a discrete approach”. Proc. Conf. Computer Methods in Mechanics (CMM 2007), Lodz-Spala 19-22 June 2007
- J. Kozicki, J. Tejchman „Investigations of size effect in tensile fracture of concrete using a lattice model”. Proc. Conf. Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering (MHM 2007), 246--249, Prague, 24--27 June 2007
- J. Kozicki, J. Tejchman „Modelling of fracture process in brittle materials using a lattice model”. Computational Modelling of Concrete Structures, EURO-C (eds.: G. Meschke, R. de Borst, H. Mang and N. Bicanic), Taylor anf Francis, 139--145 2006
- J. Kozicki, J. Tejchman „Lattice type fracture model for brittle materials”. 35th Solid Mechanics Conference (SOLMECH 2006), 215--216, Krakow, 4--8 September 2006
- J. Kozicki, J. Tejchman „Simulations of fracture in concrete elements using a discrete lattice model”. Proc. Conf. Computer Methods in Mechanics (CMM 2005), Czestochowa, Poland, June 21--24 2005
- J. Kozicki, J. Tejchman „Simulation of the crack propagation in concrete with a discrete lattice model”. Proc. Conf. Analytical Models and New Concepts in Concrete and Masonry Structures (AMCM 2005), Gliwice, Poland, June 12--14 2005
- J. Kozicki, J. Tejchman „Study of Fracture Process in Concrete using a Discrete Lattice Model”. CURE Workshop, Simulations in Urban Engineering, Gdansk September 20--22 2004
- J. Kozicki, J. Tejchman „Discrete methods to describe the behaviour of quasi-brittle and granular materials”. 16th Engineering Mechanics Conference, University of Washington, Seattle, CD--ROM, July 16--18 2003
- J. Kozicki, J. Tejchman „Lattice method to describe the behaviour of quasi-brittle materials”. CURE Workshop, Effective use of building materials, pages 131--134, Sopot October 8-9 2003
- Chareyre, B., and Villard, P. „ "Discrete element modeling of curved geosynthetic anchorages with known macro-properties." ”. Proc., First Int. PFC Symposium, Gelsenkirchen, Germany, pp. 197–203 (2002).
Not about Yade
Links to some publications not directly related to Yade, but still in relation with DEM and some of the algorithms found in Yade.
- B. Chareyre „Modélisation du comportement d'ouvrages composites sol-géosynthétique par éléments discrets - Application aux tranchées d'ancrage en tête de talus.”. Grenoble University, PhD thesis, 2003 (in french and using PFC2D, only relevant for those interested in calibration procedures, quasistaticity or representativity of tests.)